Comments on: How to fix a laminator that ate your paper

By: Brenda LeClair

Brenda LeClair — Thu, 05 Feb 2026 03:02:21 +0000

Can I get a video on how to put my purple cow laminator back together,I took it apart to get stuck paper out

By: Roxy

Roxy — Wed, 04 Dec 2024 10:48:46 +0000

I put in my laminator sheet the wrong way causing it to open and jam in there.
I need to see how the bottom comes off.
The screws do not show.
There are areas covered in sponge.
I assume the screws are under the sponge.
How can I get to them without tearing the sponge?

By: Libby

Libby — Thu, 18 Jul 2024 05:04:30 +0000

I took mine completely apart and i can’t figure out this one piece of how to put it back in place I am so frustrated with myself because of it

By: Diane Campebll

Diane Campebll — Wed, 08 Feb 2023 21:51:31 +0000

I took mine apart had to cut if off the rollers not trying to hurt the rollers now it works again.

By: John Swanson

John Swanson — Tue, 12 Jul 2022 08:14:09 +0000

In reply to Beth. It won't come out if it is rolled up inside. You'll have to unscrew and take it apart. It likely has ruined your work too. Sorry.

By: Tea

Tea — Mon, 23 May 2022 16:40:53 +0000

It went in perfect and then out of nowhere the laminator ate my work!!! I worked so hard for it but I can’t be mad at the laminator after about 3 minutes after it happened I just thought to my self “it was just hungry and didn’t want to spit it out for it tasted good” I will try again u hope this time it works because I don’t want to get it stuck again.

By: Beth Reilly

Beth Reilly — Mon, 09 May 2022 12:57:24 +0000

I can’t get my document to come out I am going mad
Model number LM-092A

By: Beth Reilly

Beth Reilly — Mon, 09 May 2022 12:02:35 +0000

I can’t get my document to come out I am going mad

By: Beth

Beth — Mon, 09 May 2022 11:48:36 +0000

It ate my sheet it wouldn’t come out of Laminator